Tag Archives: Bar Bending Machine

How to Properly Use a Bar Bending Machine?

A bar bending machine is a simple machine that bends different kinds of bars. One thing to be aware of when choosing a bar bend machine is that there are different types available on the market today. There are so many manufacturers of these machines and sometimes it can be challenging for the buyer to figure out what kind of machine he needs for his specific purpose. Here is some helpful information regarding how to properly use a bar bend machine.

The Bar Bending Machine is a device that can bend different materials from steel, iron, bronze, and aluminium.  It saves time and energy because it bends the material in a very short amount of time.  The bar bend machine bends the material into different shapes with the use of its dies.  The machine uses hydraulic pressure and has a hydraulic cylinder that is used when you press a pedal for the bending process to start and stops once you release the pedal.  The die will support the material while bending it so it can avoid any damage during the process.

Detailed introduction to the operation of a steel bar bending machine

Bending machine has various models and different types, such as fixed bending machine, steel bar cutting and bending machine, steel bar bending centre, and CNC bending centre. The following is a detailed introduction to the operation of a steel bar bending machine:

1. In the process of using the rebar bender, each part should be closed or in place, especially for moving parts to prevent accidents.

2. Pay attention to whether the connecting bolts are loose or not when using the bar bend machine, and observe whether there is abnormal noise or vibration during operation.

3. When using the rebar bend machine, pay attention to whether the temperature of each part reaches its normal working temperature, and whether there is a leakage phenomenon in the hydraulic system; If there is any abnormality, you should shut down and check-in time.

4. When using a rebar bend machine for processing rebars, you need to pay special attention to the length of reinforcement bars after each processing (processing batches corresponding to the same length can be processed at one time).

5. You should stop feeding if there is abnormality during use, then stop immediately after stopping the feeding. At this time, you need to check and find out where the abnormality occurs before restarting the operation.

3 Tips On How To Properly Use And Maintain A Bar Bend Machine 

Bar bending machines are a powerful and reliable construction tool. When used properly, these machines can increase productivity, enhance safety and help to reduce the overall cost of your project. Of course, you must use them properly.

Follow these tips on how to use and maintain a bar bend machine:

1. Always Maintain The Blades

The blades are one of the most important parts of your bar bending machine. Like any other tool, it is important that you keep them clean and sharp so they will function properly. Your blade should be clean after every use. You may also have to sharpen or replace the blades from time to time depending on the type of work you are doing with your machine.

2. Keep The Machine Lubricated

It is important that you lubricate your bar bending machine regularly in order to keep it working well and minimize wear and tear on the moving parts. This will make your machine run smoother for longer periods of time. In most cases, you will only need to lubricate it once per month if you are using it regularly; however, if you notice that it is starting to sound strange or does not work as efficiently, as usual, make sure that you lubricate it right away.

3. Operate the Machine Correctly

It is important to operate the machine correctly when using it. This ensures that you get the best results when using the machine and that you do not damage it. When operating the machine, ensure that your hands are well away from any moving parts as they can crush your fingers or hands if they get in contact with them. Also, ensure that you stand at a safe distance from the machine as this reduces the risk of injury in case something goes wrong.